Desktop CNC 1419 Assembly #1 (Spindle Mount)
1. Prepare motors and couplings
2. Assemble the motor with couping and tighten socket set screws
3. Prepare m4 8mm screws and flange bearing
4. Fix flange bearing to the side hole
※ Oops! there is no tab!!
5. After fix flange bearings
6. Prepare motor and hand wheel
7. Fix hand wheel to motor
8. Unscrew copper nut
9. Prepare motor mount and m3 9mm screws
10. assemble it with m3 screws
11. Prepare parts
12. Prepare m3 12mm screws
13. Assemble copper nut with m3 screws
14. Prepare parts
15. Assemble copper nut and spring
16. Prepare al profile and m5 25mm screws
17. Assemble with m5 screws
18. Prepare m5 25mm screws
19. Assemble with m5 screws
20. Prepare polished rod and m5 16mm screws
21. Insert rod
22. Assemble rod with m5 screws
23. Prepare al profile and m5 16mm screws
24. Assemble al profile with m5 screws
25. Prepare x-axis plate
26. Prepare flange bearings and m4 8mm screws
27. Assemble flange bearing with m4 screws
28. Prepare copper nut and m3 12mm screws
29. Assemble copper nut with m3 screws
30. Prepare m5 25mm screws
31. Assemble x-axis plate with m5 screws
32. Prepare ball screw, copper nut and spring
33. Assemble ball screw with copper nut
34. Prepare m5 25mm screws
35. Assemble remained x axis plate with m5 screws
36. Insert polished rod to x axis plate
37. Prepare base plate and bearing
38. Insert bearing to base plate
39. Prepare m5 16mm screws
40. Assemble base plate with m5 screws